Getting the best sound from your FreedConn: settings and speaker placement

August 21, 2026

Is your intercom's volume too low? Missing bass? Before switching models, follow our 3 steps to adjust your FreedConn earpieces and gain clarity.

1. Secret #1: The "Ear-to-Earpiece" alignment

This is the classic mistake. A gap of just 1 cm between the center of the earpiece and your ear canal can cause you to lose 50% of the volume and wipe out all the bass.

The test: Put your helmet on. Slide a finger between your ear and the foam. Can you feel the center of the earpiece sitting right in front of your ear canal? If not, move the velcro pads. The sound needs to be projected into the ear, not onto the earlobe or cheek.

2. The "spacer" technique (bring the source closer)

The further away the earpiece is, the more wind noise takes over the sound. In your FreedConn's box, you'll find foam spacers or thick velcro pads.

The trick: If your helmet has deep ear pockets, the earpiece sits too far from your ear. Use the spacers to "push" the earpiece forward until it lightly touches your ear. That physical contact seals the sound and naturally boosts the bass.

The further away the earpiece is, the more wind noise takes over the sound. In your FreedConn's box, you'll often find foam spacers or thick velcro pads.

3. The hardware upgrade: switching to Hi-Res (D7)

If the sound still distorts despite the adjustments, look at your hardware. Standard models are fine for GPS prompts, but for HD music, the FreedConn D7 (Hi-Res) earpieces change the game.

The difference: a sensitivity of 126dB to 132dB, delivering noticeably more raw power without distortion.

Availability: they come standard on the R3 Pro and the FX Pro/Free+. For other models, it's an affordable upgrade that transforms your kit.

4. The audio source (Spotify / Deezer)

Don't forget your phone. If you're streaming a poorly compressed MP3 file, the intercom can't work miracles.

- Setting: Go into your music app's settings (Spotify/Apple Music) and set the audio quality to "Very High". The FreedConn's Bluetooth 5.0 will handle the bitrate without any issue.